What is the use of slotting machine

Slotting machine is mainly used in medium and high-grade building decoration industry, elevator, shower room, splicing anti-theft door, kitchen equipment, label enterprises, ships, medical equipment and other industries. It can make V-shaped slotting for stainless steel sheet, copper plate, aluminum plate, composite aluminum plate, steel plate and other metal sheet materials, so that the arc radius of the workpiece edge after bending is very small and the plate is bent It can also be used to pre position the bending side length of the bending line to ensure the accuracy of the bending length. It is a new type of professional slotting equipment which is popular at home and abroad in recent years.

Operation procedure of slotting machine:

1. Before starting the machine tool, it is necessary to carefully check whether the tools, nuts and screws are firm. If any looseness is found, it must be tightened in time;

2. When installing the tool, pay attention to the cutting direction and do not reverse it;

3. The main tool turns clockwise;

4. Before feeding and slotting, make sure that the pneumatic device is opened and the workpiece is pressed on the movable pushing table and is close to the positioning plate. Hands are not allowed to be close to the knife edge;

5. When the machine tool breaks down, the power supply shall be cut off immediately and the operation shall be stopped. Special personnel shall be assigned to repair and adjust the machine tool. The machine tool is not allowed to run with defects;

6. Before processing materials, first check whether there are iron nails, sand and stone joints on the cutting tools, and stainless steel grooving machine to prevent damage to the cutting tool knuckle flying out and injuring people;

7. The power supply of the machine tool must be cut off when the machine tool is cleaned, the lubricating oil is wiped, the saw blade is replaced and the scraps on the cutting edge are removed;

8. The machine tool shall be operated, adjusted and maintained by designated personnel, and personnel unfamiliar with the machine tool shall not be used;

9. Workers should wear ear plugs, goggles and other labor protection appliances during operation.

10. The maintenance of the machine shall be carried out according to the equipment operation, maintenance and maintenance system.

Wuxi Xinda Machinery Co., Ltd. specializes in the production of slotting machine, CNC slotting machine, CNC grooving machine, stainless steel slotting machine, stainless steel grooving machine, metal sheet slotting machine, grooving machine, stainless steel plate grooving machine, digging machine and other equipment, welcome to consult and investigate www.shhmz.cn